This is a design circuit for audio power amplifier. This circuit uses based on TDA7052B. The TDA7052B and TDA7052BT are 0.5 W and 1 W mono Bridge-Tied Load (BTL) output amplifiers with DC volume control. Not only have been designed for use in TV and monitors, but TDA7052B and TDA7052BT are also suitable for use in battery-fed portable recorders and radios. This is the figure of the circuit;
This devices are integrated with a Missing Current Limiter (MCL). When the difference in current between the output terminal of each amplifier exceeds 100 mA (300 mA typ), the MCL circuit is activated. Headphone application will be allowed on this 100mA level (single-ended).
[Circuit source: NXP Application Note]
This devices are integrated with a Missing Current Limiter (MCL). When the difference in current between the output terminal of each amplifier exceeds 100 mA (300 mA typ), the MCL circuit is activated. Headphone application will be allowed on this 100mA level (single-ended).
[Circuit source: NXP Application Note]
No comments:
Post a Comment